Our semi dry stone is manufactured using a low water content, or 'semi dry' mixture of high quality fine natural aggregates, colouration pigments and additives.
Semi dry stonework has an open, slightly rough texture, akin to natural or sawn stone. This is often preferred when the requirement is to match existing natural stone, or a more natural, textured look is required.
All our semi dry products are 'through coloured' - meaning that no separate facing or core material is used (as some manufacturers do) and the same colour can be seen throughout the unit.
During our manufacturing process, precise and consistent measurements of material are graded and pre-mixed prior to being compacted into handmade timber moulds. Additives containing water/frost proofing and binding agents are also added to ensure our products can withstand all weather conditions.
A key benefit of semi dry material is that the item being cast can be taken out of the mould almost immediately, allowing the curing process to begin and the next item to be cast straight away. This is especially suited to high volumes of repetitive items - meaning lead times can be greatly reduced in some cases.
Once removed from the mould, all our semi dry products are immediately moved into our water vapour curing chamber. The high humidity within the chamber helps to slow down the curing process and results in much harder stone, less prone to breakages.
Semi dry material can be a very cost effective in comparison to other cast stone materials.
All our products are designed and manufactured in accordance with the BS1217 British Standards for Cast Stone.
Benefits of Semi Dry Stone
Specification
Strength: >28N/mm²
Typical Density: 2000Kg/m³
Drying Shrinkage: <0.04%
Water Absorption: 0.85mg/mm²
Bath
Portland
Cheshire
York
Please Note: The colour images shown are to give an indication of our standard colours only and should not be used for selection.
Please request stone samples from our sales team.
Special colours available on request.
